[Fix] Kraken Liquid Temperature Is Too High (100% Working)

Share on:

The Kraken liquid’s temperature is too high. As a result, the liquid evaporates, and the pressure rises. The problem is being observed, and possible solutions are being done.

Kraken must maintain a low liquid temperature to maintain performance and prevent the possibility of a fire. However, overheating occurs when the fluid temperature increases beyond what Kraken can control on its own. 

You should address this issue immediately to protect your device from long-term harm. This article will examine the origins, remedies, and implications of high liquid temperatures.

Kraken Liquid Temperature Is Too High

What Is Kraken liquid?

A kind of cooling agent used in electronic devices is called Kraken liquid. It is used to keep electronic components cool and is composed of water and glycol. However, Kraken liquid has the drawback of occasionally becoming too hot. This can harm the elements even though it is meant to cool.

Reasons Why Kraken Liquid Temperature Is Too High

There are several potential reasons why the liquid temperature of the Kraken is so high. One explanation could be that the cooling system is malfunctioning. The pump’s improper operation could be another factor. Finally, there’s always the possibility that the water itself has a problem.

Things that I Need Before Take Necessary Steps

You will need a clean work area, a Phillips head screwdriver, and a can of compressed air before you can begin troubleshooting. You must also be aware of where your Kraken is. For example, you might have to open the case if it’s in a locked-off area.


You need to keep a few things in mind if you’re handling the hot liquid in the Kraken.

  • To begin with, always wear gloves when working with the Kraken or anything else that the intense heat might harm.
  • Secondly, ensure the surface you plan to set the Kraken on can withstand heat.
  • Third, take care not to overheat the Kraken or the surrounding area.
  • Fourth, keep a close eye on the Kraken while it’s in operation.

How to Fix High Kraken Liquid Temperature Issue?

Here are several ways that you can use it right away.

Use a Different Machine

If you’re using a different machine, be sure it is correctly calibrated before you use it. If it isn’t, you may either recalibrate it on your own or have a professional do it. You should get accurate results after it’s calibrated.

Open Your Case

Locating the CPU should be your priority after opening the case. The CPU will often be situated in the motherboard’s core. When you’ve found it, you should inspect it to see if there are any obvious signs of damage. If there are, the CPU must be changed.

Identify Your CPU

It would be best to locate your CPU to reduce the excessive Kraken liquid temperature. After looking it up, you can do this by identifying the CPU that corresponds to your computer’s model number. Once you know your CPU’s specifications, you may check its maximum operating temperature and contrast it with the temperature of the Kraken liquid. There are a few things you can do to assist in cooling down your CPU if it is operating too hotly.

Disconnect Every Cable From Your Computer

Disconnecting all of the wires from your CPU is the thing you should do if the liquid temperature in your Kraken is too high. This applies to any USB or HDMI cables and the power cord. After everything has been disconnected, thoroughly clean your CPU. Blow out any dust that may have amassed inside the case, and then use a moist cloth to clean the outside.

Remove the Heat Sink

The Kraken’s heat sink needs to be taken off first. Remove the four screws holding it in place by unscrewing them. Next, remove the CPU’s heatsink. Using a little force could be necessary, but take care not to harm the CPU.

Clean off Any Thermal Paste Left Behind

Before using a new thermal paste, it is crucial to remove any old thermal paste. You’ll need to scrape off the old paste for this using a putty knife or another flat tool. Be careful not to harm the CPU or heatsink inadvertently. You can use a new thermal paste after completely removing the old paste.

Reapply New Thermal Paste and Reassemble the Heatsink

It’s possible that outdated or incorrectly applied thermal paste is to blame for the excessive liquid temperature in your Kraken. If so, you’ll need to disassemble the heatsink, apply the new paste, and reassemble it. To do this, adhere to these procedures.

Before you start, keep in mind that there is a chance of electrical shock and/or damage whenever you open your computer case. Before using your computer, always disconnect it from the power supply. 

Make sure you use a clean cloth or paper towel instead of your bare hands when adding or replacing the thermal paste. If the thermal paste gets on your skin, wash it off immediately.

Frequently Asked Questions

How do I fix a high CPU temp?

There are a few things you may do to try and resolve the problem if your CPU is operating too hotly:

  • Verify that your CPU cooler is placed correctly and makes excellent contact with the processor.
  • Ensure good airflow and that all your case fans are functioning.
  • You might want to dust off your suit and clean it.

How warm should AIO liquid be?

AIO liquid should feel cool to the touch but not painfully so. The optimal temperature is roughly 70 degrees Fahrenheit or room temperature. You can fix your AIO liquid if it is too warm by doing a few things.

  • To start, consider relocating the AIO to a cooler area.
  • If that doesn’t help, place cooling pads or ice packs on the exterior of the AIO.
  • Lastly, if everything else fails, you can always use the cooler liquid instead of the AIO liquid.

Is 90 hot for a CPU?

It is not too hot for a CPU at 90 degrees Celsius. Most CPUs can generally function at temperatures up to 95 degrees Celsius. However, if your CPU is constantly operating at 90 degrees Celsius, there might be an issue. If you’re unsure about your CPU’s typical operating temperature, you can look up its specifications online.

Is Kraken liquid cooling?

Kraken liquid cooling indeed exists. Kraken liquid cooling is a cooling system that cools your CPU using liquid rather than air. This could be advantageous since it could prevent overheating, which could harm your computer. 

However, Kraken liquid cooling has a drawback in that it occasionally can cause the liquid to get excessively hot, which might cause issues with your computer.

Final words

A malfunctioning cooling system is most likely to blame for the high liquid temperature of the Kraken. Therefore, you should make sure your cooling system is functioning properly by checking it. If not, you need to replace it. Additionally, you ought to monitor the temperature of your surroundings to ensure it is not too warm.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.