When you connect your devices like laptops, smartphones, or other tablets to a local network, all your devices have a unique IP address of their own. It is an addressing technique by which all the elements are connected to the same network but have a separate IP address like shared or dedicated. But sometimes, because of some manufacturer error or incorrect configurations, the IP address can conflict. And, you will get Windows detected IP address conflict error message. There are some methods to fix the problem.
[Solution] Windows Detected IP Address Conflict
To remove this Windows detected IP address conflict error message, we will discuss several methods to give you the best solution.
Method 1: Restart Your Router
Step 1: First, you have to locate the power button on your router.
Step 2: Then, you have to turn the power off. It will temporarily stop the connection of the network with all the devices.
Step 3: Now, you have to wait for around 5 minutes or a little more. You have to let the network properly shut down.
Step 4: Finally, you have to turn your router on again. Then, you have to connect your device to the network again to check the error is solved or not.
Method 2: Turn off and on Your Network Adapter
Step 1: First, you have to open the Run on your computer. For this, you have to press Windows key+R altogether to open the Run. You can also open it manually. Go to the Start and search for Run.
Step 2: Once you open the Run, you have to type ncpa.cpl in the command line and click on the OK button.
Step 3: Now, you will in the Network Connections window. You have to right-click on the adapter which you are currently using. A menu will appear then and you have to select the Disable option.
Step 4: You have to wait until the connection is properly turned off. When the adapter is properly disabled, you will be disconnected from the network.
Step 5: Now, after sometime later, you have to right-click on the adapter and click Enable from the menu.
Step 6: Finally, you have to restart your device and check if the IP conflict error is fixed or not. You can check this article to know about the best USB to HDMI adapter.
Method 3: Renew Your IP Address
Step 1: First, you have to open the Command prompt on your Windows computer system. For this, you have to go to the search engine and type cmd there. And press Enter. From the results, you have to choose the command prompt. Or, you have to simply press Windows key+X and from the menu select the command prompt.
Step 2: When you find the command prompt, you have to right-click on the command prompt, you have to choose Run as administrator from the menu bar.
Step 3: Once you open the command prompt, you have to type the following commands in the command line. You have to press Enter after typing each command.
- netsh int IP reset c:\resetlog.txt
- ipconfig /release
- ipconfig /renew
Step 4: Finally, you have to wait to execute the commands. Then, you have to check if Windows is still detecting the IP conflicts or not.
Method 4: Disable Static IP
Step 1: First, you have to open the Run on your device. You have to press Windows key+R on your keyboard. It will automatically open the Run. Or, you can go to the search engine and type Run. From the results, you will find Run.
Step 2: When the command prompt appears, you have to type ncpa.cpl in the command line. Then, you have to click on the OK button.
Step 3: Now, the network connections window will appear on the screen. There, you have to right-click on the adapter which you are currently using and select the Properties option from the menu bar.
Step 4: From the properties, you have to double click on Internet Protocol Version 4 (TCP/IPv4).
Step 5: Now, a new window will open. You have to click on the General tab. Then, you have to select both Obtain an IP address automatically and Obtain DNS server address automatically there.
Step 6: Finally, you have to click the OK in both open Windows. Then, you have to restart your computer and check if the issue is fixed or not.
Method 5: Update Your Network Card Driver
Updating the hard drive is very important for your PC. If there is an outdated driver, it can do many harms including Windows IP conflicts. So, you should regularly update the driver. To check if the drivers are up to date, follow this link. You can do it in two ways. Either you can update it manually or via any third-party software. The two methods are described below:
Method 6: Update Your Driver From Windows(Manually)
Step 1: First, you have to open the Run on your PC. You can open it in two ways. Either you have to go to the Start menu and type Run in the search engine and press Enter. From the menu, find Run, or you can simply press Windows key+R to open the Run.
Step 2: Once you open the Run, you have to type in devmgmt.msc and click OK. It will open the Device Manager.
Step 3: Now, you have to expand the Network adapters section. For this, you have to click on the arrow icon.
Step 4: Next, you have to right-click on your driver and then, select Update Driver from the menu bar.
Step 5: Finally, you have to click on Search automatically for updated driver software.
Step 5: When Windows find any update, you have to download and install the update to your computer.
Step 6: Finally, you have to restart your PC and check the issue.
Method 7: Update Your Drivers With a Third-Party App
Step 1: First, you have to download a third-party updater tool on your computer. You can also find and download third-party updater tools. There are some free updater tools Driver Booster, DriverHub, or DriverPack Solution are available. These tools are very easy to use. You can use other apps for this purpose.
Step 2: Then, you have to install the software. You have to follow the on-screen instructions to complete the installation process.
Step 3: Finally, you have to run the app and check any malware on your system. If any, you have to click on repair to fix them.
If you are interested to use a third-party theme on your Windows 10 PC, then here is an informative and interesting article for you.
Method 8: Reboot Your Modem Or Wireless Router
Step 1: First, you have to log into the administrator management page.
Step 2: Then, you have to go to the Management and then, you have to choose Reboot.
Step 3: Finally, you have to power off the cable. You can do this by unplugging the cable or simply press on the power off button to turn it off.
You have to restart your modem or Wi-Fi router and connect to the PC again to test the issue.
The Windows detected IP address conflict occurs when two devices are using the same IP address. When the problem happens, devices are unable to communicate with each other. And the devices will be disconnected. We hope you understood the concept clearly. We can suggest you know how to choose the best wireless router if you are a gamer or want the best performance from it.