There is no doubt that Enacfire E18 earbuds are awesome in quality. However, many Enacfire has reported that they are facing issues with the earbud.
If you’ve bought Enacfire E18 earbuds and the right earbud is not working, then you’re not alone, we can understand how frustrating the issue is.
But there is nothing to worry about as this is a common problem and the solution to this problem is quite straightforward.
The Enacfire E18 right earbud may not work if the earbud isn’t fully recharged.
However, there could be many other reasons for this issue. Considering all the possible causes, we have provided a complete solution to the Enacfire E18 right earbud not working issue in this article.
So, without any further uproar, let’s fix your right earbud.
Why Enacfire E18 Right Earbud Not Working?
As many issues can trigger the Enacfire E18 right earbud not working issue, it is hard to determine the exact cause for this. Here are the possible reasons:
- The earbud is in single mode.
- The right earbud isn’t fully charged.
- Problem with the connectivity.
- Problem with the software.
- Wiring issue or damaged earbud.
Whatever the reason, we’ve rounded up solutions to the most common issues with Enacfire earbuds to the rarest ones. So, you just need to follow the solutions below one by one until you fix your right earbud.
How to Troubleshoot the ‘Enacfire E18 Right Earbud Not Working’ Issue
There are many troubleshooting methods available to fix the Enacfire E18 right earbud not working issue. But you need to start with the obvious first. Let’s quickly apply the solutions below.
Solution 1: Ensure that Both Earbuds are Fully Charged
This solution has resolved the right earbud not working issue for almost 90%+ users of Enacfire.
It often happens that the charging case doesn’t work properly. For this reason, your right earbud may not be charged properly. As a result, it won’t turn on or connect to the input device.
Step 1: Make sure that your charging case is also fully charged. If the charging case is out of charge, then it won’t be able to charge the earbuds. Connect the charging case to the AC outlet via a USB charger.
Step 2: You have to ensure that you’ve placed the earbuds correctly in the charging case. Check if you’ve placed the right earbud into the right slot and the left earbud into the left slot of the charging case.
If your charger isn’t charging the right earbud even after it is fully charged, then you need to repair the charging case from the service center of Enacfire.
On the other hand, if the right earbud is fully charged yet it isn’t working, then please try the next solution below.
Solution 2: Change the Enacfire Earbud Single Mode
Enacfire has a single earbud mode feature. It allows only one earbud to play music. You need to change to single mode to allow both earbuds to play music parallelly.
Here are the steps to follow to get out of single mode:
Step 1: Remove the earbuds from the pairing list of your device and turn off Bluetooth.
Step 2: Press the touch sensor of the earbud for 8 seconds or until the power is off.
Step 3: Put the earbuds in the charging case.
Step 4: Take both buds out of the case.
Step 5: Again, press the sensor for 8 seconds to turn it on.
Step 6: Turn on Bluetooth on your device and pair the earbud again.
Check if it works properly or not after applying this solution. If not, then follow the next method below.
Solution 3: Reset Your Enacfire E18 Earbud
If there is any fault with the software or connectivity with the Enacfire earbud, then it may not work properly. In this case, resetting the earbuds will fix the issue.
Follow the steps below to reset your Enacfire E18 earbud:
Step 1: Put the Enacfire E18 earbuds into the charging case.
Step 2: Take the earbuds out of the case.
Step 3: Press and hold the sensor of the right earbud for 4 seconds until it turns off.
Step 4: Press and hold the power key for 4 to 6 seconds until a blue LED light starts flashing.
After this, your right earbud of Enacfire E18 should start working perfectly. If not, then probably your earbud is damaged and you have to replace it. If you have a warranty, then you can claim a fresh new Enacfire E18 earbud.
Frequently Asked Questions (FAQs)
Why Is Only One of My Enacfire Earbuds Connecting?
Enacfire earbuds have a single-mode feature so that you can use only one earbud. If only one of your earbuds is connecting, then it means you have single mode enabled on your earbuds. You need to disable it to connect both of your earbuds. Detailed instruction for disabling single mode is already given in this article.
How Do I Pair Both Enacfire Earbuds?
If you pair the right earbud with your phone via Bluetooth, then the other one will automatically be paired to the device. If one is pairing and another isn’t, then you need to turn off Bluetooth and press and hold the MFB button of your earbud until the indicator light starts flashing and says “pairing”. Then you can pair both Enacfire earbuds with your device.
How Do I Get Both My Earbuds to Work at The Same Time?
If you pair the earbuds with your device then both earbuds are supposed to work at the same time. If only one earbud is working, then single mode may have been enabled on the earbuds and you need to re-pair the earbuds to make them work at the same time.
What Do I Do if Only One of My Earbuds Works?
If only one of your earbuds works, then you need to do the following to fix it:
- Disable single mode.
- Restart your device and earbuds.
- Check the settings on your phone.
- Check if the earbud isn’t damaged by water or other materials.
- Check if the earbuds are working on other devices.
There can be many reasons that can cause the right earbud of Enacfire E18 not to work. However, all the possible solutions to fix the issue has given above in this article and we hope, you can fix them by applying our given solution. If none of them works, then there is nothing to worry about as you can always go to Enacfire customer support and they have experienced technicians who can easily detect the physical problem of your earbud and fix it by replacing damaged components.
Subscribe to our newsletter
& plug into
the world of technology