A series of premium digital light-processing televisions from projection TV manufacturers like Mitsubishi was the most widely used as a high-definition TV option.
It’s advised by the Mitsubishi website to clean your TV screen with either water or gentle detergent. The screen’s look and visual quality are preserved by routine cleaning.
So, if you’ve one and are eager to know how to clean a Mitsubishi Projection TV screen properly, you’ve come to the right place.
Why You Should Clean Mitsubishi Projection TV Screen
As you can see, it’s a huge TV screen to serve better quality media. But the thing is the larger a screen, the more likely it is to accumulate dust and dirt.
So, naturally, the projection TV screen can collect lots of dust, smears, and fingerprints. Unfortunately, in a long run, it’ll start to degrade your image quality as a result.
Removing them from the TV screen requires special cleaning procedures.
Step-by-Step Procedure to ‘How to Clean Mitsubishi Projection TV Screen’
There’re some specific and effective steps by following them accordingly you can easily remove all faults from the TV screen. Here’re them –
Step 1: Unplug the TV from the outlet after turning it off.
Step 2: Use warm water to wet a soft, lint-free cloth. Make sure that it doesn’t drip any water. Apply light pressure while wiping the screen vertically.
Step 3: Use a moist towel with a few drops of dish detergent to remove stubborn fingerprints, smudges, and residue.
Don’t let water or soap soak into the screen. When cleaning, move vertically and avoid applying excessive pressure to the screen.
Step 4: Use water to rinse the cloth to get rid of any soap residue. Give it a thorough squeezing.
Step 5: Use a clean towel to wipe any soap residue off the screen with a soft, vertical movement.
Step 6: Use another dry soft, lint-free cloth to gently dry the screen with the usual vertical movement.
Step 7: Connect and turn on the TV.
Now, you will clearly understand that the screen is displaying a much more vivid video than before. This is because there are no obstacles to influence it.
Frequently Asked Questions (FAQs)
Can I use vinegar to clean a TV screen?
Yes, you can. But you need to ensure equal parts water and vinegar to make the cleaning solution. Dampen a cloth in the solution and gently wipe the screen. It’ll do the job. But if you try to rub and scrub, then it’ll intend to damage the screen.
What causes the DLP TV screen to have white dots?
When one of these tiny mirrors becomes jammed and prevents the signal from reflecting, DLP white dot syndrome occurs. White spots can therefore be seen on the screen as a result. More white spots appear on the screen as more mirrors start to get caught, resulting in an unsatisfactory image.
Is it possible to use alcohol to clean my TV screen?
If your intention is to clean your TV screen with alcohol, that’s not a good idea. Manufacturers advise against using any kind of glass cleaner, scouring powder, soap, or cleaners that contain chemicals like alcohol, ammonia, acetone, or benzene while cleaning TV screens. Also, avoid paper towels or scratchy pads. If you do, you risk permanently damaging the screen by scratching it or removing the anti-glare coating.
Can wet wipes harm a plasma television’s screen?
Wet material, such as baby wipes, cannot be used with Plasma screens. Conversely, use delicate microfiber towels to clean them without applying any solution to them at all. Anti-glare coatings on plasma TVs are susceptible to damage. It’s therefore best to keep things dry.
By now, it’s quite assumable that you’ve got the idea about cleaning your Mitsubishi Projection TV screen. Follow the aforementioned steps as they’re suggested. Hopefully, you’ll be able to clean the screen properly and TV viewing will be a pleasant experience.