If your HDMI cable keeps falling out, don’t worry, it’s something that’s easily fixable. Typically, this happens due to a loose connection or when the HDMI cable is thicker, potentially too heavy for a screwless connection.
One possible solution is to tighten the HDMI port to the chassis. You can also use a locking cable to hold the HDMI cable down to one place. let’s dive deep, shall we?
Table of Contents
How to Fix a Falling HDMI Cable?
To keep your HDMI from falling off, do the following:
Tighten the HDMI Port
HDMI ports are susceptible to becoming loose, usually as a result of the stress that thicker HDMI cables put on the connection. Thankfully, almost every HDMI port is similarly wired to the frame. Without worrying about destroying internal parts or the cable itself, you can adjust the port back to its factory settings with a simple screwdriver. You can follow the steps:
Step 1- Turn the HDMI-equipped device around so the back panel faces you.
Step 2- Track down the HDMI port. If there is an HDMI cable, take it out.
Step 3- Keep an eye out for the tiny Phillips screw right above or below the port. Using the Phillips-head screwdriver, tighten this screw in a clockwise direction.
Use A Locking Cable
The supposedly “high-quality” HDMI cables which cost several hundred dollars may never make you believe them. It’s simple electrical engineering, and as far as the cables use standardized conductor materials—which most, if not all of them do—when plugged in firmly, they ought to function similarly in terms of picture quality. A stronger port grip is a characteristic that has never before been supplied by a cable, nevertheless. It’s from PPC and is referred to as the first locking HDMI in the world.
The PPC’s proprietary Locking HDMI Cable, which was first unveiled at CES (but I didn’t have a chance to check it out then), is made to provide three times better connector retention than conventional HDMI cables. Because of this, it is less likely that you will accidentally push it out of the HDMI port.
It’s crucial to remember that the cable is not truly secured into the port, so if you manage to kick or trip over it, your TV or Blu-ray player won’t be knocked to the floor. Apart from that, the Locking HDMI Cable is compatible with all HDMI standard ports and can transmit 1080p, the highest HDTV signal.
Frequently Asked Questions
How do I know if my HDMI cable is loose?
If you see sparkling picture or falling stars in your display, your HDMI connection is definitely loose.
Is it OK to bend HDMI cable?
Yes, it is ok to bend HDMI cable. But beware that a tight bend can degrade the picture quality.
Conclusion
As you can see, HDMI cable falling out is a common problem and it may happen to anyone. But there is no need to worry as it is fairly easy to solve. Hopefully, after reading this article, you can easily solve this problem by yourself.
