Bluetooth earbuds have become increasingly popular nowadays due to their convenience of use. No wire means less hassle which is always better. They come with built-in LED lights that indicate things like whether the earbud is connected to a device or not, or whether the earbud is low on power.
These flashing red & blue LED lights can sometimes malfunction and keep flashing even if it paired or connected to a charger. This can be very annoying as some earbuds have very loud colors and they can light up a whole room.
An easy way to fix this is to put tape to cover the lights or take out the lights completely from the earbuds. But there are other ways to fix this as well and here we will be showing you how you can turn off the flashing lights on your Bluetooth earbuds.
Table of Contents
- How Can You Turn the Flashing Lights Off on Your Bluetooth Earbuds?
- Frequently Asked Questions (FAQs)
How Can You Turn the Flashing Lights Off on Your Bluetooth Earbuds?
As stated above, the flashing red & blue LED lights indicate the different status of the earbud. But in general, they mean that the earbuds are unpaired from your device. Sometimes they keep flashing if there is something wrong with the earbuds. Here are the methods to fix the constant flashing lights of your earbud:
Method 1: Put Tape Over the Earbuds
You will stop seeing the flashing lights if you just put black or any other colored tape on the earbuds. Yes, it is that simple. This is the easiest solution you will find. Granted this may make the earbuds look ugly, but it is effective.
Note here that, this only goes against certain earbuds. If your earbuds do not have the lights on the earbuds themselves, then you can move on to the next method.
Method 2: Pairing Them with a Device
If the lights are flashing on your earbuds, there is a high chance it is in pairing mode. Simply pair them with a device to stop the flashing lights. Follow the steps below –
- Go to the Bluetooth setting of the device you want to pair with, i.e., smartphone, laptop, etc.
- From that device, search for the earbuds.
- When found, click on the earbuds to pair them with the device.
This will pair the earbuds with the device of your choosing and stop the flashing lights.
Method 3: Hard Reset
If the flashing lights don’t stop after pairing, then there is a malfunction with the earbuds. A hard reset will revert the earbuds back to their original settings. Follow these steps –
- Put the earbuds in their charging case.
- Go to your device’s Bluetooth settings.
- Unpair the earbuds completely by clicking Forget this device.
- Now pair the earbuds with the device again.
Note that, not all brands and models have the same method of hard reset. The steps described above are generally true for most earbuds but to be certain, see the manual that came with your earbuds.
Method 4: Connect Both Earbuds to Each-Other
It is possible that both earbuds were accidentally unpaired from each other. This could cause the constant flashing of lights. Unpairing and pairing them again is the easiest solution here as well. See the above methods for the steps.
Method 5: Disable Status Lights
You can also disable the status lights if you choose to. Just press and hold the power button of your earbuds for about 3-5 seconds until you see the flashing lights go off.
Method 6: Charge the Earbuds
It could also be that the earbuds are out of charge and they need to be recharged. Put the earbuds inside the charging case and plug them into an energy outlet. Leave the earbuds to charge for a few hours and then try connecting with them again.
Frequently Asked Questions (FAQs)
Do flashing lights mean something bad for my Bluetooth earbuds?
No, flashing lights are mostly indicators that the earbuds are in pairing mode or need to recharge.
Will flashing lights harm my earbuds?
No, just flashing lights cannot harm your earbuds unless they were physically damaged before by other means.
In conclusion, the tape is the best solution that will definitely be effective. But unpairing also works in most cases. We hope we were able to help you stop the flashing lights on your earbuds. If you need further assistance, please do not hesitate to contact us in the comments section. Thank you!